Automatic Sprinkler Irrigation Machine with Agricultural Garden Farm Center Pivot Sprinkler Irrigation

Product Description

Automatic Sprinkler Irrigation Machine with Agricultural Garden Farm Center Pivot Sprinkler Irrigation

Product Description

Centrol Pivot Irrigation System

Central pivot sprinkler is also called pointer sprinkler and circular sprinkler. 

This machine is a sprinkling irrigation equipment that takes the central pivot as the circle point and realizes the irrigation area through the length of the irrigation radius. The upper end is connected with the rotary elbow through the rotating mechanism (collecting ring), and the crop is sprayed with water through the spraying system on the rack.

The core structure is made of hot-dip galvanized steel pipe, angle steel, steel plate, round steel, etc. The center-supported sprinkling irrigation machine is applicable to square, round and other large plots, and can overcome<25 ° slope plots, with wide application range and large sprinkling area.

FIXED PIVOT IRRIGATION

Pivots are irrigation systems consisting of one or more spans which rotate around a fixed point anchored to the ground.The spans turn repeatedly around a fixed central point . They are simple to use and require little intervention. These machines are both reliable and excellent value for money.

ONAL PIVOT IRRIGATION

The spans rotate less than 360 degree and therefore maximize the irrigated surface area when there is an obstacle (farm building, tree, pylon etc.) situated in the middle of the Field, or where the shape of the Field does not allow full rotation.An automatic reverse system allows continuous operation whilst the security system ensures that the spans stop at the end of the irrigated zone.

TOWABLE PIVOT IRRIGATION

Towable pivot is equipment with a tower on swiveling wheels and a central unit on a moveable chassis fitted with a beam. Once the wheels are aligned with the span's axle, the whole machine can be moved by tractor. This type of pivot allows a reduction in the cost per hectare irrigated by increasing the area covered by the same machine.

Four Wheel Linear & Rotating Irrigation

This model can perform combined programs (linear and pivot irrigation) thanks to its articulated elbow adapted on a large bearing. Its structure, being similar to that of a pivot, allows the spans to do an about turn and therefore increase the irrigated surface area. Its operation can be completely automated. Water supply via a fiexible pipe or a PEHD connected to an articulated elbow Tower on a chassis with 4 motorized wheels Can accommodate an electricity generator Furrow guidance or steel cable guidance.

Folding Span

Offering maximum flexibility, the folding span is the ideal solution for bypassing obstacles in the middle of fields. The spans downhill from a tower equipped with a rotating axle continue to irrigate whilst the spans uphill from the tower are stopped with their sprinklers shut off.

PIVOTIRRIGATIONMACHINE
	9000DYP
SPANDIAMETER	254mm
THICKNESSOFPIPE	3.2mm
KINDSOFSPANMATERIAL	HOT-DIPGALVANIZEDPIPE
	STEEL304 PIPE
	ALUMINIUMPIPE
	HOTGALVANIZATEDPIPEWITHPOLYSPANINSIDE
PIPEDIAMETER	141mm:41. 15-61.26m
	168mm:41. 15-61.26m
	203mm:34.44-54.86m
	254mm:34.44-41. 15m
OVERHANGLENGTH	6.7-26.8m
CONNECTIONBETWEENSPANS	ALUMINUMCLAMPANDRUBBERGASKET
TRUSSROD	22mm  19. 1mm  17.5mm
MAXSLOPE	30%

TOWABLEIRRIGATIONMACHINE
TYPEOFMACHINE	THREEWHEEL		FOURWHEEL
LOW/NORMAL/HIGH	LOW	NORMAL		HIGH
TIREOPTIONS	11.2"X22.5"
	11.2"X24.5"
	11.2"X24"
	14.9"X24"
	16.9"X24"

LINEARIRRIGATION
	FOURWHEEL		TWOWHEEL
HEIGHTOFCENTRALPART	LOWER	NORMAL	HIGHER
MAXLENGTHOFTHEFIELD	UNLIMITED		UNLIMITED
CHANNELWATERSUPPLY	YES		NO
PIPELINEWATERSUPLY	YES		YES
CENTRALWATERSOURCESUPPLY	YES		NO
ROTATION	NO		YES
PIPEDIAMETER	141mm		141mm
	168mm		168mm
	203mm		203mm
COMPATABILITY	9000DYP		9000DYP
GUIDANCEMODE	FURROW
	STEELCABLE

Galvanized Steel

Inside with Poly Span, outside with Galvanized Steel

Acceptable for most conditions, but may not meet expectations under certain water conditions Standard option on for any Yulin center  pivot,  linear  or  towable irrigation machine.

Natural Rubber Lining Available for Yulin center pivots and linears (8″and 6 5/8″only) Standard with 3/4″couplers and 1″drains.

Company Profile

Dalian Heshe Trading Co., Ltd.was established in 2017 and is located in the Bohai Rim Economic Belt the south erneconomic center of Northeast China, and a comprehensive industrial base -Dalian City. It is an integrated service provider that integrates the research and development,sales,and technical services of metal cutting tools and tool systems.We always prioritize improving customer production efficiency and product quality, and continuously reducing production costs. We analyze and understand the production process of our customers, and provide them with technical solutions and high-quality products suitable for different needs.

FAQ

Q: Are you a trading company or a manufacturer?
A: We are a professional manufacturer. We not only have our tool factory but also a carbide factory.
 
Q: How long can I expect to get the sample?
A: After you pay the sample fee and send us the confirmation documents, the sample will be ready for delivery in 3-7 days. The sample will be sent to you by express and arrive in 3-5 working days. You can use your express account, or prepay us if you don't have an account.
 
Q: How long can I expect to get the sample?
A: After you pay the sample fee and send us the confirmation documents, the sample will be ready for delivery in 7-15 days. The sample will be sent to you by express and arrive in 3-5 working days. You can use your express account, or prepay us if you don't have an account.
 
Q: How about your inventory?
A: We have a large number of stock products, and regular types and sizes are in stock.
 
Q: Is free shipping available?
A: We don't offer free shipping. We can give you a discount if you buy a large number of products.